sE Electronics
sE2200
Large-diaphragm condenser · Cardioid · 20–20,000 Hz
- 8 dB(A) self-noise — a studio figure that also means a very clean feed from a quiet acoustic act.
- 611 g on a boom arm over a stage: specify the stand, not just the microphone.
Frequency response
No response curve yet.
MicSense only draws a curve redrawn from a graph the manufacturer publishes — it never estimates one from the microphone’s class. No published graph has been redrawn for the sE2200 yet, so the numbers are in the spec table below.
Polar pattern
Generated from the first-order directivity formula for cardioid. It illustrates the pattern type — it is not a measurement of this individual model.
Specifications
| Manufacturer | sE Electronics |
|---|---|
| Model | sE2200 |
| Type | Large-diaphragm condenser |
| Form factor | Side-address |
| Polar pattern | Cardioid |
| Frequency range | 20–20,000 Hz |
| Sensitivity | 24 mV/Pa · -32.5 dBV/Pa |
| Max SPL | 125 dB SPL (0.5 % THD) |
| Self-noise | 8 dB(A) |
| Impedance | — not published by the maker |
| Connector | XLR3M |
| Powering | Phantom 48 V |
| Weight | 611 g |
Specifications: sE Electronics specifications page · last checked 2 Oct 2026. These are the maker’s published figures for this model. A dash never means zero: “not published by the maker” means the maker’s documents give no figure; “not yet checked” means MicSense has not confirmed one yet. Spotted an error? Tell us.
MicSense notes
| Price tier | Mid |
|---|---|
| Introduced | — not recorded |
Price tier and “a rider regular” are MicSense’s own judgement, not the maker’s.
What it gets used for
- FOH vocal
- Acoustic instrument
- Choir / ensemble
MicSense tags microphones by the job on a live stage, not by studio category — so you can filter for “kick in” or “monitor vocal” instead of working backwards from “large-diaphragm condenser”.
sE2200 alternatives: closest in published specs
Based on published specifications only — always listen at soundcheck. These are the microphones in the MicSense library whose datasheet figures sit closest to the sE Electronics sE2200’s for the same live job, with the reasons. It says nothing about how they sound.
Not compared for the sE Electronics sE2200: response curve not redrawn yet.
-
Sennheiser
MK 4
- Same job: FOH vocal, acoustic instrument, choir / ensemble
- Same type: condenser (large diaphragm)
- Same cardioid pattern
- Same form: side-address
- About the same output — within the datasheets’ tolerance
- Max SPL as high or higher (140 vs 125 dB SPL)
-
Sennheiser
MK 8
- Same job: FOH vocal, acoustic instrument, choir / ensemble
- Same type: condenser (large diaphragm)
- Switchable pattern — set it to cardioid
- Same form: side-address
- Max SPL as high or higher (142 vs 125 dB SPL)
- ≈ 4 dB less output — add about 4 dB gain
-
sE Electronics
X1 A
- Same job: FOH vocal, acoustic instrument
- Same type: condenser (large diaphragm)
- Same cardioid pattern
- Same form: side-address
- About the same output — within the datasheets’ tolerance
- Max SPL as high or higher (130 vs 125 dB SPL)
Compare it against the alternatives.
MicSense lets you put up to four microphones side by side — spec table, overlaid response curves and polar diagrams on one screen. Free with a free Squaresmile account.