Sennheiser
MD 441-U
Dynamic · Supercardioid · 30–20,000 Hz · a rider regular
- 30 Hz to 20 kHz from a moving coil — a wide range for a dynamic.
- A five-position bass roll-off and a two-position brilliance switch — more tone shaping on the microphone than most channel strips offer.
- The wedge-shaped body is unmistakable and, at about 450 g, is why it ships with a proper yoke rather than a clip.
Frequency response
No response curve yet.
MicSense only draws a curve redrawn from a graph the manufacturer publishes — it never estimates one from the microphone’s class. No published graph has been redrawn for the MD 441-U yet, so the numbers are in the spec table below.
Polar pattern
Generated from the first-order directivity formula for supercardioid. It illustrates the pattern type — it is not a measurement of this individual model.
Specifications
| Manufacturer | Sennheiser |
|---|---|
| Model | MD 441-U |
| Type | Dynamic |
| Form factor | End-address |
| Polar pattern | Supercardioid |
| Frequency range | 30–20,000 Hz |
| Sensitivity | 1.8 mV/Pa · ≈ -54.9 dBV/Pa |
| Max SPL | — not published by the maker |
| Self-noise | — none (passive capsule) |
| Impedance | 200 Ω (electrical impedance) |
| Connector | XLR3M |
| Powering | None (dynamic) |
| Weight | 450 g |
Specifications: Sennheiser specifications page · last checked 2 Oct 2026. These are the maker’s published figures for this model. A dash never means zero: “not published by the maker” means the maker’s documents give no figure; “not yet checked” means MicSense has not confirmed one yet. Spotted an error? Tell us.
MicSense notes
| Price tier | Premium |
|---|---|
| Introduced | — not recorded |
Price tier and “a rider regular” are MicSense’s own judgement, not the maker’s.
What it gets used for
- Toms
- Guitar cab
- Horn / brass
- Broadcast
- FOH vocal
MicSense tags microphones by the job on a live stage, not by studio category — so you can filter for “kick in” or “monitor vocal” instead of working backwards from “large-diaphragm condenser”.
MD 441-U alternatives: closest in published specs
Based on published specifications only — always listen at soundcheck. These are the microphones in the MicSense library whose datasheet figures sit closest to the Sennheiser MD 441-U’s for the same live job, with the reasons. It says nothing about how they sound.
Not compared for the Sennheiser MD 441-U: max SPL not published by the maker · response curve not redrawn yet.
-
Shure
Beta 57A
- Same job: toms, guitar cab, horn / brass
- Same type: dynamic
- Same supercardioid pattern
- Same form: end-address
- ≈ 4 dB more output — about 4 dB less gain
-
sE Electronics
V7 X
- Same job: toms, guitar cab, horn / brass
- Same type: dynamic
- Same supercardioid pattern
- Same form: end-address
- About the same output — within the datasheets’ tolerance
-
Sennheiser
e 906
- Same job: toms, guitar cab, horn / brass
- Same type: dynamic
- Same supercardioid pattern
- About the same output — within the datasheets’ tolerance
- Side-address — aim it from the side, not the end
Compare it against the alternatives.
MicSense lets you put up to four microphones side by side — spec table, overlaid response curves and polar diagrams on one screen. Free with a free Squaresmile account.