Sennheiser
ME 2
Electret / lavalier · Omnidirectional · 50–18,000 Hz
- The lavalier that ships in the box with most evolution wireless presentation sets — the one every conference room already owns.
- Omnidirectional and 30 g, with a 130 dB ceiling that is generous for speech and marginal on an instrument.
Frequency response
No response curve yet.
MicSense only draws a curve redrawn from a graph the manufacturer publishes — it never estimates one from the microphone’s class. No published graph has been redrawn for the ME 2 yet, so the numbers are in the spec table below.
Polar pattern
Generated from the first-order directivity formula for omnidirectional. It illustrates the pattern type — it is not a measurement of this individual model.
Specifications
| Manufacturer | Sennheiser |
|---|---|
| Model | ME 2 |
| Type | Electret / lavalier |
| Form factor | Lavalier |
| Polar pattern | Omnidirectional |
| Frequency range | 50–18,000 Hz |
| Sensitivity | 17 mV/Pa · ≈ -35.4 dBV/Pa |
| Max SPL | 130 dB SPL (THD not stated) |
| Self-noise | 32 dB(A) |
| Impedance | — not published by the maker |
| Connector | wireless bodypack |
| Powering | Bias voltage from the bodypack (bias via bodypack (10 V, 3.5 mm jack)) |
| Weight | — not published by the maker |
Specifications: Sennheiser specifications page · last checked 2 Oct 2026. These are the maker’s published figures for this model. A dash never means zero: “not published by the maker” means the maker’s documents give no figure; “not yet checked” means MicSense has not confirmed one yet. Spotted an error? Tell us.
MicSense notes
| Price tier | Budget |
|---|---|
| Introduced | — not recorded |
Price tier and “a rider regular” are MicSense’s own judgement, not the maker’s.
What it gets used for
- Theatre lav
- Broadcast
- Lectern / podium
MicSense tags microphones by the job on a live stage, not by studio category — so you can filter for “kick in” or “monitor vocal” instead of working backwards from “large-diaphragm condenser”.
ME 2 alternatives: closest in published specs
Based on published specifications only — always listen at soundcheck. These are the microphones in the MicSense library whose datasheet figures sit closest to the Sennheiser ME 2’s for the same live job, with the reasons. It says nothing about how they sound.
Not compared for the Sennheiser ME 2: response curve not redrawn yet.
-
DPA
4061 CORE+
- Same job: theatre lav, broadcast, lectern / podium
- Same type: electret / lavalier
- Same omnidirectional pattern
- Same form: lavalier
- Max SPL as high or higher (136 vs 130 dB SPL)
- ≈ 9 dB less output — add about 9 dB gain
-
Sennheiser
MKE 1
- Same job: theatre lav, broadcast
- Same type: electret / lavalier
- Same omnidirectional pattern
- Same form: lavalier
- Max SPL as high or higher (142 vs 130 dB SPL)
- ≈ 11 dB less output — add about 11 dB gain
-
Sennheiser
MKE Essential Omni
- Same job: theatre lav, broadcast
- Same type: electret / lavalier
- Same omnidirectional pattern
- Same form: lavalier
- Max SPL as high or higher (140 vs 130 dB SPL)
- ≈ 11 dB less output — add about 11 dB gain
Compare it against the alternatives.
MicSense lets you put up to four microphones side by side — spec table, overlaid response curves and polar diagrams on one screen. Free with a free Squaresmile account.