New plugin

Airchain

FM radio airchain emulation — AGC, four-band squash, emphasis, clipper and transmission artifacts behind one big SQUASH knob.

VST3 / AUmacOS14 presets
Discover Airchain
support@squaresmile.de Köln, Germany

Sennheiser

MM 435

Dynamic · Cardioid · 40–20,000 Hz

  • The wireless capsule version of the MD 435 — a dynamic that reaches 20 kHz, screwed onto a transmitter.
  • 163 dB SPL at 1 kHz — the capsule will not be the part that distorts.

Frequency response

No response curve yet.

MicSense only draws a curve redrawn from a graph the manufacturer publishes — it never estimates one from the microphone’s class. No published graph has been redrawn for the MM 435 yet, so the numbers are in the spec table below.

Polar pattern

Generated from the first-order directivity formula for cardioid. It illustrates the pattern type — it is not a measurement of this individual model.

Specifications

Published specifications for the Sennheiser MM 435
ManufacturerSennheiser
ModelMM 435
TypeDynamic
Form factorHandheld
Polar patternCardioid
Frequency range40–20,000 Hz
Sensitivity1.8 mV/Pa · ≈ -54.9 dBV/Pa
Max SPL163 dB SPL (THD not stated)
Self-noise17 dB(A)
Impedance245 Ω
ConnectorSennheiser handheld transmitter thread
PoweringNone (dynamic)
Weight119 g

Specifications: Sennheiser specifications page · last checked 2 Oct 2026. These are the maker’s published figures for this model. A dash never means zero: “not published by the maker” means the maker’s documents give no figure; “not yet checked” means MicSense has not confirmed one yet. Spotted an error? Tell us.

MicSense notes

MicSense’s own notes on the Sennheiser MM 435 — not maker figures
Price tierPremium
Introduced— not recorded

Price tier and “a rider regular” are MicSense’s own judgement, not the maker’s.

What it gets used for

  • Wireless handheld capsule
  • FOH vocal

MicSense tags microphones by the job on a live stage, not by studio category — so you can filter for “kick in” or “monitor vocal” instead of working backwards from “large-diaphragm condenser”.

MM 435 alternatives: closest in published specs

Based on published specifications only — always listen at soundcheck. These are the microphones in the MicSense library whose datasheet figures sit closest to the Sennheiser MM 435’s for the same live job, with the reasons. It says nothing about how they sound.

Not compared for the Sennheiser MM 435: response curve not redrawn yet.

  1. Sennheiser MMD 835
    • Same job: wireless handheld capsule, FOH vocal
    • Same type: dynamic
    • Same cardioid pattern
    • Same form: handheld
    • About the same output — within the datasheets’ tolerance
    • Check: Max SPL 9 dB lower (154 vs 163 dB SPL) — check it on loud sources
  2. Shure SM58
    • Same job: wireless handheld capsule, FOH vocal
    • Same type: dynamic
    • Same cardioid pattern
    • Same form: handheld
    • About the same output — within the datasheets’ tolerance

    Not comparable: max SPL not published by the maker

  3. Shure KSM8
    • Same job: wireless handheld capsule, FOH vocal
    • Same type: dynamic
    • Same cardioid pattern
    • Same form: handheld
    • ≈ 3 dB more output — about 3 dB less gain

    Not comparable: max SPL not published by the maker

Compare it against the alternatives.

MicSense lets you put up to four microphones side by side — spec table, overlaid response curves and polar diagrams on one screen. Free with a free Squaresmile account.